Occupational Safety Analysis Using the Hazard Identification And Risk Assessment Control (HIRAC) Method at Pt. Sucofindo Duri Year 2022
Analisis Keselamatan Kerja Dengan Menggunakan Metode Hazard Identification And Risk Assessment Control (HIRAC) Di Pt. Sucofindo Duri Tahun 2022
Keywords:
Risk, Hazard, Kecelakaan Kerja, HIRACAbstract
Hazard Identification and Risk Assessment and Control (HIRAC) is a method of identifying work accidents with risk assessment as one of the important points for implementing the Occupational Health and Safety Management System (SMK3). risk analysis that depending on the type of work, if the job is radiography, it is called high because of the dangers of radiation. PT.Sucofindo has conducted a risk analysis and conducted a medical check-up, they must understand the work in the field. Occupational Health and Safety (OHS) is in the interest of employers, workers and governments around the world. According to ILO estimates, every year around the world 2 million people die from work-related problems. The purpose of the study was to analyze work safety data using the Hazard Identification and Risk Assessment Control (HIRAC) method at PT.Sucofindo Duri in 2022. The research design was qualitative. There were 3 informants namely, Company Leaders, HSE Officers, and Safety Officers. The results of the research PT, Sucofindo have conducted research, and have SOP and JSA, already know the potential hazards and risk actions in the field. Research suggestions for leaders must control every job so that accidents do not occur in the field, For HSE Officers to identify and map the potential hazards that occur in the work environment.
Downloads
References
Christina, W. Y., Djakfar, L., & Thoyib, A. (2012). Pengaruh Budaya Keselamatan dan Kesehatan Kerja (K3) Terhadap Kinerja Proyek Konstruksi. Rekayasa Sipil, 6(1), 83-95.
Endroyo, B. (2010). Faktor-Faktor Yang Berperan Terhadap Peningkatan Sikap Keselamatan dan Kesehatan Kerja (K3) Para Pelaku Jasa Konstruksi Di Semarang. Jurnal Teknik Sipil dan Perencanaan, 12(2).
Fajarulhak, F. (2020). Analisis Keselamatan dan Kesehatan Kerja (K3) Berdasarkan Undang-Undang Nomor 01 Tahun 1974 Tentang Keselamatan dan Kesehatan Kerja (K3) Pada PT. Instruksi Jaya Energi Tekindo (Doctoral dissertation, Universitas Internasional Batam).
Giananta, P., Hutabarat, J., & Soemanto, S. (2020). Analisa Potensi Bahaya dan Perbaikan Sistem Keselamatan Dan Kesehatan Kerja Menggunakan Metode HIRARC Di PT. Boma Bisma Indra. Jurnal Valtech, 3(2), 106-110.
Ihsan, T., Edwin, T., & Irawan, R. O. (2017). Analisis Risiko K3 dengan Metode HIRARC Pada Area Produksi PT Cahaya Murni Andalas Permai. Jurnal Kesehatan Masyarakat Andalas, 10(2), 179-185.
Wijaya, A., Panjaitan, T. W., & Palit, H. C. (2015). Evaluasi Kesehatan dan Keselamatan Kerja dengan Metode HIRARC pada PT. Charoen Pokphand Indonesia. Jurnal titra, 3(1), 29-34.
Kaligis, R. S. V., Sompie, B. F., Tjakra, J., & Walangitan, D. R. O. (2013). Pengaruh Implementasi Program Keselamatan dan Kesehatan Kerja (K3) Terhadap Produktivitas Kerja. Jurnal Sipil Statik, 1(3).
Ramadhan, F. (2017, November). Analisis Kesehatan dan Keselamatan Kerja (K3) Menggunakan Hazard Identification Risk Assessment and Risk Control (HIRARC). In Prosiding Seminar Nasional Riset Terapan| SENASSET (pp. 164-169).
Supriyadi, S., Nalhadi, A., & Rizaal, A. (2015, December). Identifikasi Bahaya dan Penilaian Risiko K3 pada Tindakan Perawatan & Perbaikan Menggunakan Metode HIRARC (Hazard Identification and Risk Assesment Risk Control) pada PT. X. In Prosiding Seminar Nasional Riset Terapan| SENASSET (pp. 281-286).
Triswandana, I. W. G. E., & Armaeni, N. K. (2020). Penilaian Risiko K3 Konstruksi dengan Metode HIRARC. Safety Science, 121, 15-29.
Published
How to Cite
Issue
Section
Copyright (c) 2022 Jurnal Olahraga dan Kesehatan (Orkes)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
